Data Storage Converter

What Is the Data Storage Converter?

The Data Storage Converter converts a data size from one unit to another. The workspace offers Bytes, KB, MB, GB, TB, and PB. Enter a number, choose the starting unit and the target unit, then click Process. The result shows converted values with Copy and Download controls for the result.

How to Use the Data Storage Converter

1. Enter a number in the Value field. For example, enter 1.
2. Choose the starting unit in the From list. For example, choose MB.
3. Choose the target unit in the To list. For example, choose KB.
4. Click Process. The result appears below the button.
5. Use the swap button (⇄) to reverse the From and To units without retyping the value.
6. Use Copy to copy the result, or Download to save it.

Worked Example

When tested, clicking Process produced result lines labelled 1 MB = 1024.00 KB, 1 MB = 0.000977 GB, 1 MB = 1048576 Bytes, and 1 MB = 0.000000954 TB. Those values are correct for 1 MB using binary factors (1 MB = 1,024 KB = 1,048,576 bytes). See Limitations below about the result label.

Limitations

• Bug found during testing: the result lines were labelled 1 MB even when the input unit shown was Bytes. Do not rely on the result label alone. Check that the numbers match the unit you intended before using them.
• This tool uses binary factors (1 KB = 1,024 bytes, 1 MB = 1,024 KB). Some drive makers and some contexts use decimal factors (1 KB = 1,000 bytes), so a drive or operating system may report a different size for the same storage.
• This tool converts data-size units only. It does not convert data-transfer speed, file counts, or compression ratios.
• The result does not update as you type. You must click Process after entering a value or changing a unit.
• Displayed values are rounded to the digits shown on screen. For capacity planning, re-check the rounded result.

Frequently Asked Questions

Which data units does this tool support?

The workspace lists Bytes, KB, MB, GB, TB, and PB in the From and To lists.

Do I need to click Process?

Yes. Enter the value, choose both units, then click Process to show the result.

Why does 1 MB equal 1,024 KB here instead of 1,000 KB?

This tool uses binary factors, where each step multiplies by 1,024. Decimal contexts use 1,000 per step, so 1 decimal MB equals 1,000 decimal KB.

Why might my computer show a smaller size than the drive box states?

Drive makers often use decimal gigabytes, while operating systems often report binary gibibytes. The same drive can therefore show two different numbers in two places.